FX Impact High Flow V2 Dual Hole Transfer Port

Description

FX Impact High Flow V2 Dual Hole Transfer Port

The successor to our FX Impact High Flow V2 Dual Hole Transfer Port;  we have managed to optimize and even enlarge the air passage in this new version 2 of our High Flow V2 Dual Hole Transfer port. The V-shaped transfer opening makes sure you will have the maximum and smoothest air passage area. The middle support bridge divides the transfer port into a dual hole port. This middle bridge makes sure the pellet or slug nose cannot fall into the enlarged transfer port hole, but will be guided smoothly by the middle bridge into the barrel. This set also includes our high flow, stainless steel, pellet and slug probe. Together, this set will give the maximum airflow behind the projectile.  The dual hole transfer port has 76% larger air passage area (in .22)
These sets are developed for slugs and pellet use! and can be used in combination with our power tuning hammer spring

Please note:

Since end 2022 some FX barrel kits are equipped with a long brass transfer port combined with barrel attachment,  made out of one piece.
If your barrel kit is equipped with this version, please select our stainless steel barrel attachment to your transfer port for a one on one replacement.

Before tightening the grub screw that holds the barrel in the breech, make sure the barrel is adjusted properly so the magazine slides in and out smoothly.

FX uses a medium strength tread locker to fixate the transfer port to the barrel to prevent the barrel coming loose. We strongly advise you to use a tread locking adhesive.
Any modification done to the airflow of your rifle, will affect the entire setup and performance, you might need to re-adjust the settings of your rifle again to get the best possible performance.

Available in .22.